Refraction

Computerized Lensmeter CL-200

CL-200
  • Green Light Reading Beam
    The CL-200 incorporates a newly developed green light reading beam. With this ISO 7944 complying feature, ABBE compensation is no longer required. The TOPCON CL-200 is the first computerized lensmeter to offer this ISO compliant feature that enhances measurement precision.
  • Smart Design, Consistent Results
    Ingenuity in the CL-200 design presents for a slim, modern look while providing consistent and reliable results.
  • Comfortable Operation
    The viewing of the LCD screen covers a 75 degree angle of observation allowing clear, comfortable readings from virtually any position regardless of the operator's height. A conveniently located knob permits the brightness of the screen to be adjusted to best suit the working environment.
  • New Color LCD Screen
    The wider, newly designed color LCD simplifies the interpretation of the readings, even with progressive lenses. The dynamic color measuring graphics show the ADD values as they are being measured providing better control and ease of use.
  • New Lens Table
    The magnetically operated lens table slides smoothly for easy and comfortable lens reading. Even when measuring small progressive lenses with a near point close to the edge, its smart and minimal design makes measurement of all types of lenses fast and easy.
  • Contact Lens Measurement
    Soft and hard contact lenses can easily and comfortably be measured using the CL-200 lens plate and ring accessories that come standard with the instrument.
  • Models
    The CL-200 comes in a variety of models to accommodate the needs of all practitioners: CL-200 without printer (CL-200), CL-200 with printer (CL-200P), and CL-200 with printer and PD measurement (CL-200PD).
  • Fast, Easy to Load Printer
    Just drop the roll of paper in the printer receptacle and the quick and quiet printer is ready to work! Uncomfortable threading or sliding of the printing paper is avoided.
  • Small and Convenient Accessory Box
    A conveniently located compartment in the back of the instrument provides space to store accessories, ink cartridges and paper.
<Specifications>
Measurement range Sphere 0 to ± 25D (0.01/0.12/0.25D steps)
Cylinder 0 to ± 10D (0.01/0.12/0.25D step)
Axis 1° to 180°(1°step)
Addition 0 to + 10D (0.01/0.12/0.25D steps)
Prism 0 to 10△ (0.01/0.12 /0.25D steps)
Cylinder Mode MIX/-/+
Prism Mode X-Y (OrthogonalCoordinates), P-B (Polar Coordinates), No Display
Lens Detection SINGLE/PROGRESSIVE/AUTO
Light Source Green
Wavelength Criterion e-line/d-line with ABBE compensation
Lens Diameter φ5 to 100mm
Screen 5.7inch / 320×240 dots Color
Data Display S, C, A, P, Add, R/L
Bar-meter, distance Rx, Add power
PD measurement Range 50-90mm (on PD model only)
External Interface RS232C×2, USB(2.0)×1
Power Supply 100-240V / 50VA (Auto Shut-off in 10 minutes)
Dimensions 200(W) × 220(D) × 410(H) mm
Weight Approx. 4kg
Drop-in fast Printer Thermal Printer

△pagetop