“Japan emergency dwelling construction on fast track following tsunami”
September 2011 / Obara Construction Co., Ltd.

Topcon IS allows one person to survey three distant sites in one day

“Machine control system enables even compaction throughout the construction area”
October 2010 / Yame-Hodo Co., Ltd.

“The GPT-9000MC system has greatly improved all aspects of our pavement work”

“3D-MC² makes up for lost time”
October 2010 / Bowes Construction

“New technology speeds runway grading”

“The IS has completely changed our as-built survey procedures”
September 2010 / Nagumo Construction Company Limited

“Enhanced progress management has increased quality of construction works”

“Topcon GNSS shortened the work period from one month to two weeks”
September 2010 / Reisui Company Limited

“The GR-2100 has revolutionized our survey procedures that significantly saved time, labor and cost”

“The IP-S2 will bring us enormous opportunities”
August 2010 / Kobayashi Consultant Company

“Data collection is so easy, so fast, and so safe. All we need is to drive a car”

“Ultra-dense point clouds to visualize details of surface profile”
August 2010 / Tamano Consultants Co., Ltd.

“Visualization has become one of our key technologies that increases customer satisfaction and increases our brand strength”

“Scanning a Historic Wooden Arch Bridge”
July 2010 / Daiken Sokuryo Engineer Company

“Topcon Laser Scanner captures critical data for nomination for World Heritage Site”

“Imaging Capability Eliminates 'Uncertainty'”
July 2010 / Office Inashin

“Topcon’s IS has brought a perfect solution for every challenge I face”

“The IS gives me a feeling as if I had an assistant at the tripod side”
June 2010 / Tanaka Kengo Office

“Combined information of coordinates and live images gives clients perfect understanding”

“Topcon 3D-MC allowed us to pave the complex ramp quickly and accurately”
June 2010 / Watanabe Sato Co., Ltd.

“Veteran Operator Admires Its Accuracy and Ease of Use”

“Machine Guidance System Reduces the Site Preparation Cost by More Than 50 Percent”
May 2010 / Sugadaira-Doken Company Ltd.

“Pocket-3D is Very Easy to Use, Ideal Software for Our System”

“Topcon GPT Total Stations Allows Us to Constantly Maintain Positioning Accuracy within Millimeters”
May 2010 / Japan Turkey Metro Joint Venture

“After-sales service and technical support expertise offered by Al Fajer - a Topcon dealer in UAE - made our choice easiest”

“Backsight observation capability assures highly accurate reproduction of coordinate systems for periodic monitoring”
April 2010 / Keisoku Net Service Company Ltd.

“GLS-1000 can take data of tunnel walls in a half period of time”

“Design data of farm roads are overlaid on the video images, allowing us to easily identify the profiles to be managed”
April 2010 / Nagumo Construction Company Limited.

“Live Images of Topcon IS Speed Up Stakeout Tasks by Three Times”

“Despite the different conditions, the finishing accuracy was always stable”
March 2010 / Seikitokyu Kogyo Co.,

“Topcon LPS-900 Provides an Asphalt Paver with ±2mm Accuracy”

“Topcon's post processing software is exceptionally user-friendly and makes everything easier”
March 2010 / Korea Ocean Science & Engineering Corporation

“GPS+GLONASS Technology Brings a Dramatic Improvement in Survey Efficiency and Reliability”

“3D model is the best tool to give detailed explanations to our clients. (GPT-9000A)”
February 2010 / Tanaka Gumi Co., Ltd.

“Scanning capability allows us to take far more detailed measurements in amazingly shorter time.”

“System 110 is the best equipment for water-filled paddy preparation (System 110)”
February 2010 / Yamazaki Farm

“LED lightbar guides our courses, eliminating overlaps. It's great.”

“Revolutionizing Archaeology with the Latest Scanning Technology”
January 2010 / Saqqara Pyramid Laser Scanning Project

“Scanning for clues - Recording the mysteries of a 4600-year-old pyramid”

“Topcon's Digital Photogrammetry and Robotic Technologies Exponentially Increase Archaeological Survey Efficiency (ImageMasterPRO, GPT-9000A)”
January 2010 / Misuzu General Consultant Company

“ImageMaster PRO cut down data processing time to one third, GPT-9000A reduced time and labor by 50 percent”

“Topcon GR-3 and IS Dramatically Increases Job Efficiency in SAudi Arabial NAtional Monorail Construction Project (GR-3, IS)”
January 2010 / ALFAF for trading and contracting LTD.CO.

“Railway construction requires the highest possible surveying technologies to ensure the maximum safety without compromising vehicle speed”

“Excavation, Project Monitoring and Quality Control Using the Same Database (3D-MC excavator guidance system X63)”
December 2009 / Nishio-gumi Company Limited

“Topcon 3D-MC and GPT-9000A streamlined excavation procedures of sand basin in the middle of steep slope.”

“Topcon GLS-1000 Cuts Down Measurement Time by 50 percent (3D Laser Scanner GLS-1000)”
December 2009 / Futaba Consultant Company

“Clients gave high marks to the 3D models so they can overview the landfill status at a glance.”

“Topcon GPS System Revolutionizes Offshore Engineering (GPS Reciever HiPer Pro)”
November 2009 / Fudo Tetra Corporation

“Workboat navigation and water depth measurement can be performed by one single person”

“Topcon Machine Control Systems Dramatically Improved Safety, Quality and Productivity (3D-MC, MillimeterGPS)”
November 2009 / Sunago-gumi Corporation

“Excavation speed doubled. Even a novice operator can complete in the same speed with the same quality.”

“GPT-9000A saved time by 25 percent and greatly increased accuracy in all phases in construction (GPT-9000A)”
October 2009 / Enoki Industries Company Limited

“Topcon has the best software for us in both functionality and user-friendliness”

“Chinese Authorities Recognize the World's Best Technology (TopNET, HiPer-Pro)”
October 2009 / Hefei Institute of Surveying and Mapping

“Topcon GNSS CORS system satisfies all our demands”

“2-millimeter accuracy of GLS-1000 was quite impressive to us (GLS-1000)”
September 2009 / Sumitomo Densetsu

“Laser Scanner dramatically improves safety and productivity in precise monitoring of road subsidence.”

“Topcon GNSS increases 'Work Efficiency' by 450% (HiPer Pro)”
September 2009 / Feelit Limited

“It's more important to enhance our survey technology than simply saving the cost.”

“Prism pole on the dozer was wobbly, but the GPT-9000A constantly tracked it. (GPT-9000A)”
August 2009 / Ichiken Company Limited

“We decided to own a robotic total station becausewe can use it both for machine controls and for as-built survey.”

“Topcon's advanced technology helps us with the most challenging tasks (GTS-725 HiPer Series)”
August 2009 / FIBREX

“Seamless data exchange provided maximum flexibility to utilize both of total stations and GPS receivers”

“Full-robotic capability gave our personnel a more freedom (GPT-9000A)”
July 2009 / MUTUMI CONSTRUCTION Company Limited

“One person can perform as-built survey, the same person can draw a plan back in the office even on the same day.”

“On-site Training for Cutting-edge Machine Control Systems (MC)”
July 2009 / CMI - Japan Construction Method and Machinery Research Institute

On-site Training Gives Them Right Understanding of Cutting-edge Machine Control Systems.

“I was looking a challenging task (LPS-900)”
June 2009 / Godai Kogyo K.K.

Robotic-based Machine Control System Maximizes Efficiency and Quality in Land Preparation Applications.

“Learning the TopSURV was just a breeze (GR-2100)”
June 2009 / Ministry of Housing OMAN

Our surveyors love to use Topcon GPS because it's easier to use and more productive.

“Robotic One-man survey for Steep Dam Construction Site (GPT-9000A)”
May 2009 / Nishiura Construction limited company

“Breakthrough technology allows our surveyors to take charge of two or more job sites concurrently, saving considerable time and labor.”

“Compaction Control System for bypass road construction (GPT-9000A)”
May 2009 / Miyashita Corporation

Topcon Compaction Control System Dramatically Increases Work Efficiency and Quality of Earthworks.

“RTK-GPS for as-built survey (HiPer Ga)”
April 2009 / Maeda Corporation

RTK-GPS simplifies operation and drastically decreases time and costs involved in construction surveys.

“Imaging Station for volume calculation (IS)”
April 2009 / Van oord / Leighton

“Without the IS, we may need at least seven teams instead of two”

“Laser Scanning for sediment control dam construction (GLS-1000)”
March 2009 / Kobayashi Consulting Company

High-speed 3D Data Capturing Increases Measurement Efficiency and Reduces Construction Costs

“RTK-GPS for layout works at mega construction project (HiPer Ga)”
March 2009 / wade adams

Wade Adams expands productivity with Topcon HiPer Ga

“Machine control for medium or small scale road constructions (LPS-900)”
February 2009 / OBAYASHI ROAD

“A wide range of effects is obtained (work efficiency is 10 to 20% higher) even in a small scale work spot. We will aim to create the IT execution system which can be applied to every scale and process of pavement.”

“Laser Scanning for 3D Modeling of golf course (GLS-1000)”
February 2009 / GEOKOSMOS

Scanning of Golf course and Soccer Stadium using Topcon 3D Laser Scanner

“RTK-GPS for water and sewage pipeline construction (GR-3)”
February 2009 / ADMAC

GPS capability soars in ADMAC's Al-Wathba project